Directory
Network Taps
Network Taps were developed to address perhaps the most prevalent issue with network intrusion detection deployments -- how to connect the IDS to the network. The basis of the issue is that the switches and routers that serve as connection points for intrusion detection systems are “owned” in the enterprise by the IT or networking group, not the security group. This leaves the security group soliciting permanent access to the spanning port of the switch or router. The spanning ports are scarce, and expensive, so the IT group is more than hesitant to relinquish them. Following closely behind in the issues is the fact that the definition of “spanning” is loosely held by the router and switch manufacturers. See the Switch Port Mirroring Page for the syntax for configuring various switches.
The typical solution to avoid these issues was to add a switch or hub to the network in order to support the IDS, although the most efficient method is arguably the Network Tap.
For more information about Network Taps, see the article in the Miscellaneous section.
VSS monitoring, Inc.
Visit the Product SiteVSS monitoring’s Taps cover both copper and fiber media from T1 to 10Gig. The Taps include the 1X1 series (1 network X 1 monitoring device), 1XN series and also the NX1 series (Tap Switches). The aggregation taps have up to 64MB of memory to buffer traffi ...
Secure Taps
Visit the Product SiteConnects to Your Network in Seconds With any other vendor, starting a network IDS / IPS project means trying to convince the network group to let you use a scarce spanning port or place an expensive switch somewhere inline, thereby creating a potential ...
Network Critical
Visit the Product SiteNetwork Critical is the premier provider of Access Technology Solutions for today’s datacenter. Our Network TAPs give you the ability to safely, securely and economically see what is happening on your network. We provide enterprise Ethernet TAP access s ...
Finisar
Visit the Product SiteFault-tolerant, copper or optical, full-duplex TAPs maximize visibility and minimize link downtime on switched LANs and SANs. Finisar TAPs provide access to all network traffic from both sides of a full-duplex link at line rate. Completely invisible and n ...
Net Optics
Visit the Product SiteNetwork Taps create permanent access ports for passive monitoring with devices such as protocol analyzers and IDS. Regeneration Taps offer all the benefits of Taps, plus they enable multiple devices to monitor a single link, simultaneously in real time. ...
DataCom Systems
Visit the Product Sitehe 10/100-AT+2C Full Duplex Tap provides easy 24 x 7 access to your 10/100 Ethernet segments. Two IDS devices, analyzers, or probes can access the same segment at a single point, eliminating contention for network links. The 10/100-AT+2C Full Duplex Tap's ...
Top Layer
Visit the Product SiteMinimal information on the Top Layer site, but there is an emphasis on their IDS Load Balancer 10 100 1000 Copper ...